Thompson Center Encore Classifieds: Gun Talk

Home » General Conversation » Gun Talk » Contender Barrel ID

Show: Today's Messages :: Polls :: Message Navigator
E-mail to friend

Re: Contender Barrel ID [message #46509 is a reply to message #46507]

Sun, 28 February 2021 17:46

DrHoward1955
Messages: 606
Registered: January 2015
Location: Texas

Senior Member

Glenn,
I checked the lungs. They are split, so two piece. The other owner, or a previous owner pulled the sights and plugged the holes. The barrel is dead on 21" and the smaller diameter than the 23" barrels.
It looks like we’re between ‘93 & ‘03. The barrel crown is odd to me. All my other Contenders have had crowns like the Encores a stepped recessed crown.
Thanks for your help.
John

[Updated on: Sun, 28 February 2021 17:53]

Report message to a moderator

[Message index]

		Contender Barrel ID By: DrHoward1955 on Sat, 27 February 2021 16:48
		Re: Contender Barrel ID By: Crubear on Sun, 28 February 2021 08:23
		Re: Contender Barrel ID By: cajuntec on Sun, 28 February 2021 08:52
		Re: Contender Barrel ID By: DrHoward1955 on Sun, 28 February 2021 15:37
		Re: Contender Barrel ID By: cajuntec on Sun, 28 February 2021 16:19
		Re: Contender Barrel ID By: DrHoward1955 on Sun, 28 February 2021 17:46
		Re: Contender Barrel ID By: DrHoward1955 on Sun, 28 February 2021 18:12
		Re: Contender Barrel ID By: cajuntec on Sun, 28 February 2021 19:11
		Re: Contender Barrel ID By: cajuntec on Sun, 28 February 2021 19:14

Previous Topic:	T/C 7mm TCU barrel???
Next Topic:	Contender

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Jun 08 18:32:12 EDT 2024