MGM Encore bull barrel in 280 AI with forearm [message #11568] |
Tue, 12 June 2012 20:49 |
cur_dog
Messages: 31 Registered: February 2012 Location: Texas
|
Novice Contributor |
|
|
Bought this setup from a guy on here. I never used it, going another direction ( Rifle ADD )
Encore bull barrel built by MGM in 280 Ackley Improved. Comes with forearm, MGM base and MGM sock.
Receiver and butt stock not included
Match Grade Machine, Encore 280 AI, 20 inches, Tight neck (.313), 1-9 Twist, Stainless,
Step Bull 1.230 Barrel has a hanger bar installed and will come with the fore grip (wood) that has been fully inlet for the barrel.
Barrel was broken in using Shilens instructions, and was fully load developed using the ladder method. This barrel, on my action, with my load shoots better then 1/2 MOA.
Load was developed with Barnes TTSX 140 grain bullets, Nosler brass.
I have 86 rounds thru the barrel, the bore is flawless.
I have plenty of pictures I can send to a email address.
http://s293.photobucket.com/albums/mm54/cur_dog/280%20AI/
565 TYD - FIRM
-
Attachment: 1.jpg
(Size: 153.27KB, Downloaded 229 times)
-
Attachment: 3.jpg
(Size: 110.38KB, Downloaded 233 times)
-
Attachment: 4.jpg
(Size: 115.25KB, Downloaded 189 times)
|
|
|
|
|