Thompson Center Encore Classifieds: Gun Talk » bedding/floating encore forearms

Home » General Conversation » Gun Talk » bedding/floating encore forearms

Show: Today's Messages :: Polls :: Message Navigator
E-mail to friend

bedding/floating encore forearms [message #13]

Thu, 10 January 2008 13:58

littleking
Messages: 531
Registered: January 2008
Location: Columbus, OH

Senior Member
Forum Admin

has anyone done this? what kind of results were obtained?

i've thought about floating/bedding mine to see if it will tighten up the groups i'm getting on my .17 rem even farther.

ideas?

Report message to a moderator

Re: bedding/floating encore forearms [message #370 is a reply to message #13]

Sun, 08 February 2009 23:57

mdewitt71
Messages: 6
Registered: February 2009
Location: Kansas

Forum Newbie

I am thinking about having my forend bedded for my 270 but wanna get another forend to do it.
The quick change forend that I have on it now is wearing at the quick detach screw and I am not really liking it.
Will go to the standard HD camo rifle forend and have that one bedded.

Report message to a moderator

Re: bedding/floating encore forearms [message #2143 is a reply to message #13]

Tue, 26 October 2010 23:26

Flexwing man
Messages: 5
Registered: October 2010
Location: Indiana

Forum Newbie

littleking wrote on Thu, 10 January 2008 12:58

has anyone done this? what kind of results were obtained?

i've thought about floating/bedding mine to see if it will tighten up the groups i'm getting on my .17 rem even farther.

ideas?

I prefer to use a hanger bar that attaches to the barrel at two points. Then the forearm is attached to the hanger bar. The forearm is free floated from the barrel via the hanger bar. This system has worked the best for me.

Flexwing man

Report message to a moderator

Previous Topic:	muzzleloading groups @250
Next Topic:	Forearm Cartridge Holder

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun May 19 00:26:49 EDT 2024