Thompson Center Encore Classifieds
Find your Encore Barrels here!

Home » General Conversation » Reloading » .270 win loads
.270 win loads [message #28542] Sun, 09 February 2014 11:08 Go to next message
jman270 is currently offline  jman270
Messages: 12
Registered: February 2014
Location: alabama
Forum Newbie
Anyone have suggestions for .270? I'll be loading for my tc encor , Browning bar, and Remington 7400. I like the hornady sst 130 gr bullet, kinda new to loading, I've only loaded about 1000 rds of .40 s&w . Was wondering if a roll crimp would be sufficient or if I need to factory crimp

Report message to a moderator

Re: .270 win loads [message #30369 is a reply to message #28542] Thu, 03 April 2014 22:24 Go to previous messageGo to next message
cholifield is currently offline  cholifield
Messages: 37
Registered: March 2011
Location: South MS
Novice Contributor
always had excellent results with H4831 and Nosler Ballistic Tip 130 grain right at maximum load. but that was in a ruger mark II bolt action. in the semi autos I would probably suggest using a Lee factory crimp die and backing off on the load a good bit.

Report message to a moderator

Re: .270 win loads [message #30376 is a reply to message #30369] Fri, 04 April 2014 09:53 Go to previous messageGo to next message
rchatting is currently offline  rchatting
Messages: 499
Registered: August 2011
Location: Middle Georgia
Forum Regular
RL22 works well also, at least with the 150GR SST in my Mossberg 100ATR. I use H335 in my 15" encore, but that is with a 110gr bullet and I was looking for a faster powder to reduce muzzle blast and recoil.

Report message to a moderator

Re: .270 win loads [message #30762 is a reply to message #30376] Sat, 19 April 2014 20:28 Go to previous message
Mr.270win is currently offline  Mr.270win
Messages: 19
Registered: February 2013
Location: PA
Forum Newbie
IMR 4831 with Nosler 130 BT Fed 210 primer works great in my Weatherby Deluxe IMR 4831 with 150 Sierra Gameking Fed GM215 primer is great in my Remington Sendero.

John

Report message to a moderator

Previous Topic: .460 rifle loads
Next Topic: reloading data
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu May 02 22:25:45 EDT 2024
.:: Contact :: Home ::.