17 Remington [message #38172] |
Wed, 15 April 2015 19:44 |
|
I have recently acquired two 17 Rem. barrels. A 14 inch and a 23 inch. Has anyone got any good starting loads to share. I will probably use 25 grain bullets. I have on hand Varget, H4198, W-748, IMR 3031 and maybe another. Are these all or any of them good powder for the 17? Any ideas and suggestions are welcome. Thanks.
mrmurl
Mr. Murl
ΜΟΛΩΝ ΛΑΒΕ
Molan Labe
"They that can give up essential liberty to obtain a little temporary safety deserve neither safety nor liberty." - Benjamin Franklin
“Quemadmoeum gladuis neminem occidit, occidentis telum est.” (A sword is never a killer, it is a tool in the killer’s hands.) – Lucius Annaeus Seneca, circa 4 BC – 65 AD
"America will never be destroyed from the outside.
If we falter and lose our freedom, it will be because
we destroyed ourselves."
~ ~ Abraham Lincoln ~ ~
|
|
|
|
|
Re: 17 Remington [message #38191 is a reply to message #38189] |
Fri, 17 April 2015 09:07 |
|
I have been leaning toward IMR3031. I have had great luck with it in the past on other loads. That may be where I head for this. Thanks and good shooting.
Mr. Murl
ΜΟΛΩΝ ΛΑΒΕ
Molan Labe
"They that can give up essential liberty to obtain a little temporary safety deserve neither safety nor liberty." - Benjamin Franklin
“Quemadmoeum gladuis neminem occidit, occidentis telum est.” (A sword is never a killer, it is a tool in the killer’s hands.) – Lucius Annaeus Seneca, circa 4 BC – 65 AD
"America will never be destroyed from the outside.
If we falter and lose our freedom, it will be because
we destroyed ourselves."
~ ~ Abraham Lincoln ~ ~
|
|
|
Re: 17 Remington [message #38323 is a reply to message #38191] |
Wed, 06 May 2015 07:53 |
|
I always stick with RL-15 22.5-22.8gr with the 7 1/2 primer and I've never heard of anyone not loving that load.
In fact, I've never used anything else because of the success with it.
Used to be a huge .17 community over at the coyotegods website, but its long gone with Vic and John Henry's info..
[Updated on: Wed, 06 May 2015 07:54] Report message to a moderator
|
|
|