TC4704SB 444 Marlin HausofArms Custom by Bellm 22" SS Full Contour Barrel [message #40832] |
Thu, 24 March 2016 18:54 |
HausofArms
Messages: 149 Registered: December 2011 Location: Greeley, Colorado
|
Junior Member Forum Sponsor |
|
|
VERY VERY LIMITED EDITION. This TC4704SB is brand new. It began life as a 22" Full Contour SS barrel chambered in 44 mag with a 1 in 20" rate of twist made by Bergara. It has been rechambered to the 444 Marlin caliber and generally inspected by Mike Bellm. Note, standard rifle forends are too small for this diameter. The solution is to use your MZLDR forend and the custom adaptor screws I will provide. Drilled and tapped for a scope. Not drilled for sights. This barrel will fit any Encore, Prohunter or Endeavor frame from Thompson Center. Barrel will also be custom engraved "HausofArms Custom by Bellm"
This barrel will be dropped shipped to you for HausofArms by Mike Bellm, so while he has it here are some other custom gunsmithing services that can be done prior to shipping:
Cut and Recrown down to 20"= $60
Cut and ReCrown below 20"= $75
Install 6 screw Weaver base= $59
Install 6 screw EGW Picatinny base= $79
Machine muzzlebrake at full length= $185
Cut and machine muzzlebrake at shorter length= $190
Note, you will be purchasing the barrel direct from HausofArms, these additional services wcan be ordered and paid to Mike Bellm directly. He can be contacted at mike@bellmtcs.com, please refence your HausofArms order number when contacting Mike. Thanks, Marty
Here is the link to buy: http:// www.hausofarms.com/-TC4704SB-444-Marlin-HausofArms-Custom-by -Bellm-22-SS-Full-Contour-Barrel_p_835.html
Marty
tc4marty@gmail.com
www.hausofarms.com
[Updated on: Mon, 19 July 2021 19:52] by Moderator Report message to a moderator
|
|
|