|
|
|
|
|
|
Re: 9mm Vent Rib Barrel Without Choke Pics [message #44705 is a reply to message #44703] |
Wed, 14 November 2018 15:52 |
gemihur
Messages: 312 Registered: March 2012 Location: Ridgelines of Virginia
|
Forum Regular |
|
|
Them hotshots are the stepchild barrels. The .222 octagon and 7 TCU 10" were also the hardest to sell.
I never saw the advantage of spinning a shot cup down the rifling just to detente the centrifuge at the last minute or making the bullet jump a half inch thru the chambers leade.
... just my personal perspective.
But a NINE!!! Now thats a hotshot that you don see.
Think twice...shoot once.
|
|
|
|
Re: 9mm Vent Rib Barrel Without Choke Pics [message #44711 is a reply to message #44706] |
Thu, 15 November 2018 13:37 |
|
Crubear
Messages: 1796 Registered: March 2010 Location: NW Georgia
|
Top Contributor Forum Moderator |
|
|
one of the most accurate barrels I ever had was a 10" 7TCU. The only one that was more accurate? Same in 6.5 TCU.
The 6.5 was purchased as a Christmas present for me, so the wife put it up until Christmas. When I finally got it there was a rust "growth" all the way down the bore. I've never seen anything like it. Cleaned it up and took it to the range thinking it wasn't going to shoot worth a darn. Gave me my second MOA 5 shot paper group. And man was it fun on 200 yd rams.
Honestly, I have all the barrels I want or could ever need..... wait, look, there's another!!
[Updated on: Thu, 15 November 2018 13:40] Report message to a moderator
|
|
|
|
|
|