telling original from G2 frame? plus 45/410 question [message #8322] |
Mon, 23 January 2012 14:13 |
larryflew
Messages: 8 Registered: December 2011 Location: MN
|
Forum Newbie |
|
|
Newby to the contender here.
Is there an easy way to tell an older contender from a G2? Or serial number break point?
2nd question is regarding the 45/410 barrels. Are they all good for 3 inch or where some only good for the shorter 410 shell. Thanks.
Minnesota shooter
|
|
|
Re: telling original from G2 frame? plus 45/410 question [message #8325 is a reply to message #8322] |
Mon, 23 January 2012 16:17 |
|
Crubear
Messages: 1798 Registered: March 2010 Location: NW Georgia
|
Top Contributor Forum Moderator |
|
|
The older contenders have some kind of engraving on the side, the G2 looks just like a small Encore. G2 will take any Contender barrel, but you may have problems with early single piece lugs - which is also true on newer G1 frames. You cannot use a G2 barrel on a G1 frame.
G1 Frames
G2 Frame
Honestly, I have all the barrels I want or could ever need..... wait, look, there's another!!
[Updated on: Mon, 23 January 2012 16:17] Report message to a moderator
|
|
|