Encore pistol barrel on a Pro Hunter [message #12688] |
Sun, 05 August 2012 21:46 |
pavan
Messages: 5 Registered: July 2012 Location: Laredo, TX
|
Forum Newbie |
|
|
I am sure this has been asked before, but, I did not find anything here and I would like a reply from the pros.
Will a 15 inch Encore pistol barrel fit on a Pro Hunter frame? Is there anything special I need to buy?
Thanks,
Pavan
|
|
|
|
|
|
|
|
|
Re: Encore pistol barrel on a Pro Hunter [message #15707 is a reply to message #15681] |
Mon, 05 November 2012 09:31 |
|
Crubear
Messages: 1798 Registered: March 2010 Location: NW Georgia
|
Top Contributor Forum Moderator |
|
|
Important note -
If you have a barrel that's under 16"
And you put an extension or muzzle brake on that takes it over 16"
Then you can only use it on a pistol.
If you have the extension permanently attached; through welding or pinned,
Then you can use it as either a rifle or pistol.
Bonding agents like Red Loctite or epoxy do not qualify as permanent.
Honestly, I have all the barrels I want or could ever need..... wait, look, there's another!!
|
|
|