.223 LOADS [message #13773] |
Tue, 04 September 2012 18:45 |
ap4877
Messages: 6 Registered: September 2012 Location: Calif
|
Forum Newbie |
|
|
I HAVE A 14" .223 BARREL LOOKING FOR LOAD INFO, HAVE HODGDON 322 POWDER AND I'M LOOKING FOR A GOOD LOAD FOR BENCH REST SHOOTING 100 YRDS AND OUT TO 200+ YRDS, ANY HELP WOULD BE GREAT, BULLET WEIGHT, BULLET TYPE AND LOAD INFO.
THANKS. AL
|
|
|
|
Re: .223 LOADS [message #13778 is a reply to message #13777] |
Tue, 04 September 2012 21:20 |
dave22250
Messages: 160 Registered: January 2012 Location: S.W.Pa.
|
Junior Member |
|
|
One load that works for me in an encore 15 in.pistol and a 28 in.pro hunter is max load in nosler book with Re 15 and a Fed 205 primer and I'm using winchester brass,the 15 in will do 1/2 in and the pro hunter seems to like it too,but still new to me,have'nt been shooting it much yet. I forgot thats with a 55 grn nosler BT.
[Updated on: Fri, 07 September 2012 22:29] Report message to a moderator
|
|
|
Re: .223 LOADS [message #13819 is a reply to message #13778] |
Wed, 05 September 2012 16:35 |
rchatting
Messages: 499 Registered: August 2011 Location: Middle Georgia
|
Forum Regular |
|
|
Made it back from the range. Got sub moa with 24.0gr H322 with 45 grain sierra sp in the 14" barrel. I tried 23.0, 24.0 and 25.0 and 24.0 won out. Forget about the H335, the muzzle blast is terrible. Gave me a headache with ear muffs on. I didn't think the 1" of barrel would make that much of difference, but it did. I may try 23.5 gr H322 and 24.5 to see if it gets any better but I doubt it. I also got 1/2" group with my CVA .223 Elite Stalker with the same load (24" bbl). It is definitely a keeper.
|
|
|