HELP!! [message #26411] |
Tue, 10 December 2013 21:12 |
egoredayooper
Messages: 13 Registered: October 2013 Location: United States
|
Forum Newbie |
|
|
HELP...Never done this.. do I just run 308 casing thru 7mm 08 FL die? Some where to read up on how to do..
|
|
|
Re: HELP!! [message #26421 is a reply to message #26411] |
Wed, 11 December 2013 08:42 |
|
Crubear
Messages: 1798 Registered: March 2010 Location: NW Georgia
|
Top Contributor Forum Moderator |
|
|
I'm assuming your going to 7-08
Yes, resize and trim to length. If you're using military brass work the load up, case dimensions in military brass can be thicker. Also, after you fire a round try dropping a bullet into the fired case. If it doesn't drop down into the case "STOP SHOOTING". There isn't enough room in your chamber for the brass to expand and release the bullet and you'll need to do some neck turning. (If you neck turn and the bullet drops to the shoulder then you have donuts, but it's OK to keep shooting)
Honestly, I have all the barrels I want or could ever need..... wait, look, there's another!!
[Updated on: Wed, 11 December 2013 08:45] Report message to a moderator
|
|
|
|
|
|
|
|
|
|
Re: HELP!! [message #26484 is a reply to message #26480] |
Thu, 12 December 2013 18:29 |
rchatting
Messages: 499 Registered: August 2011 Location: Middle Georgia
|
Forum Regular |
|
|
You mean my mossberg has a tighter chamber than a ruger. Never would have figured that.
|
|
|