Thompson Center Encore Classifieds
Find your Encore Barrels here!

Home » Archive » Sold, Traded, Found, or No Longer Available/Wanted » WTS/ 6.8 SPC Long Rimmed (yep a WILDCAT 20" threaded)
WTS/ 6.8 SPC Long Rimmed [message #46749] Sat, 07 August 2021 16:34 Go to previous message
sunnysmarine is currently offline  sunnysmarine
Messages: 987
Registered: July 2011
Location: CA
Senior Member
20" blue full bull threaded 5/8x24 was a 23" 6.8 SPC, now it is a 20" 6.8 SPC Long Rimmed, chamber has been reamed .10 deeper (I get .070) and the throat lengthened to accommodate 120 - 130gr bullets for better capacity = velocity (looks like a 27 Herrett) Using 30-30 brass and standard 6.8 SPC dies adjusted to accommodate the longer case, This project was started by someone else, I had it cut and threaded and the throat lengthened, Shot it about 50 times with H4198 and IMR 4198 120 SST and several 130gr (did not have a chronograph)And then the next project came along it has been patiently waiting on me a long time, Probably wont happen so time to find its new owner

will come with barrel no sights, 50 cases and a good number of this and that 130 gr bullets to get you started

TYD 299.00 personal check or USPS money order
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: WTS Contender 7TCU Blued Bull Super 14
Next Topic: WTS/ 10" 7TCU and supplies
Goto Forum:
  


Current Time: Wed May 15 11:11:28 EDT 2024