Thompson Center Encore Classifieds: Reloading

Home » General Conversation » Reloading » 35 Remington Wildcat Loads (Reloading Off the Chart)

Show: Today's Messages :: Polls :: Message Navigator
E-mail to friend

Re: 35 Remington Wildcat Loads [message #41496 is a reply to message #41487]

Wed, 27 July 2016 06:39

rchatting
Messages: 499
Registered: August 2011
Location: Middle Georgia

Forum Regular

I have data for 35 remington in heavier loads, like 180 grain and 200 grain, but my data doesn't cover anything as low as a 110 grain. I shoot mine out of a CVA Hunter which the gun is also chambered in 7mm-08 and .243, so not too worried about pressure as long as I stay well below max for those cartridges. Sounds like you are on the right track and are checking all the safety angles. So far, H4198 has been the most accurate powder I have used in it. I got good groups with the first powder I tried, so never went any further. I have considered RL 7 though. Good luck!

Report message to a moderator

[Message index]

		35 Remington Wildcat Loads By: guncrazyhoosier on Thu, 26 May 2016 02:17
		Re: 35 Remington Wildcat Loads By: guncrazyhoosier on Tue, 26 July 2016 08:44
		Re: 35 Remington Wildcat Loads By: rchatting on Wed, 27 July 2016 06:39
		Re: 35 Remington Wildcat Loads By: guncrazyhoosier on Wed, 27 July 2016 11:02
		Re: 35 Remington Wildcat Loads By: gemihur on Fri, 17 May 2019 22:41

Previous Topic:	25 TCU load dta
Next Topic:	IMR4227

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu May 09 15:51:40 EDT 2024